Description
Main
| range | TeSys |
|---|---|
| product name | TeSys F |
| product or component type | Contactor |
| device short name | LC1F |
| contactor application | Resistive load |
| utilisation category | AC-1 |
| poles description | 4P |
| power pole contact composition | 4 NO |
| [Ie] rated operational current | 250 A (at <40 °C) at <= 440 V AC-1 |
| [Uc] control circuit voltage | 220 V AC 40…400 Hz |
Complementary
| [Uimp] rated impulse withstand voltage | 8 kV |
|---|---|
| overvoltage category | III |
| [Ith] conventional free air thermal current | 250 A (at 40 °C) |
| rated breaking capacity | 1200 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current | 1200 A 40 °C – 10 s 700 A 40 °C – 30 s 600 A 40 °C – 1 min 450 A 40 °C – 3 min 350 A 40 °C – 10 min |
| associated fuse rating | 160 A aM at <= 440 V 250 A gG at <= 440 V |
| average impedance | 0.35 mOhm – Ith 250 A 50 Hz |
| [Ui] rated insulation voltage | 1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C |
| power dissipation per pole | 22 W AC-1 |
| mounting support | Plate |
| standards | IEC 60947-1 IEC 60947-4-1 EN 60947-4-1 EN 60947-1 JIS C8201-4-1 |
| product certifications | ABS UL CB RMRoS BV RINA DNV LROS (Lloyds register of shipping) CCC UKCA |
| connections – terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: bar 2 cable(s) – busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection |
| tightening torque | Control circuit: 1.2 N.m Power circuit: 18 N.m |
| control circuit voltage limits | Operational: 0.85…1.1 Uc 40…400 Hz (at 55 °C) Drop-out: 0.35…0.55 Uc 40…400 Hz (at 55 °C) |
| inrush power in VA | 770 VA 40…400 Hz cos phi 0.9 (at 20 °C) |
| hold-in power consumption in VA | 8.1 VA 40…400 Hz cos phi 0.9 (at 20 °C) |
| heat dissipation | 5.9…7.2 W |
| operating time | 35 ms closing (at Uc) 130 ms opening (at Uc) |
| mechanical durability | 10 Mcycles |
| maximum operating rate | 2400 cyc/h 55 °C |
| compatibility code | LC1F |
