Categories

Latest Posts

TeSys F contactor – 4P (4 NO) – AC-1 – <= 440 V 200 A - coil 220 V AC

TeSys F contactor – 4P (4 NO) – AC-1 – <= 440 V 200 A - coil 220 V AC

SKU: LC1F1154M7 Categories: , Tag:

Description

Main

range TeSys
product name TeSys F
product or component type Contactor
device short name LC1F
contactor application Resistive load
utilisation category AC-1
poles description 4P
power pole contact composition 4 NO
[Ie] rated operational current 200 A (at <40 °C) at <= 440 V AC-1
[Uc] control circuit voltage 220 V AC 40…400 Hz

Complementary

[Uimp] rated impulse withstand voltage 8 kV
overvoltage category III
[Ith] conventional free air thermal current 200 A (at 40 °C)
rated breaking capacity 920 A conforming to IEC 60947-4-1
[Icw] rated short-time withstand current 1100 A 40 °C – 10 s
640 A 40 °C – 30 s
520 A 40 °C – 1 min
400 A 40 °C – 3 min
320 A 40 °C – 10 min
associated fuse rating 125 A aM at <= 440 V
200 A gG at <= 440 V
average impedance 0.37 mOhm – Ith 200 A 50 Hz
[Ui] rated insulation voltage 1000 V conforming to IEC 60947-4-1
1500 V conforming to VDE 0110 group C
power dissipation per pole 15 W AC-1
mounting support Plate
standards EN 60947-1
JIS C8201-4-1
EN 60947-4-1
IEC 60947-4-1
IEC 60947-1
product certifications RMRoS
CB
DNV
LROS (Lloyds register of shipping)
BV
RINA
UL
ABS
CCC
UKCA
connections – terminals Power circuit: bar 2 cable(s) – busbar cross section: 20 x 3 mm
Power circuit: lugs-ring terminals 1 cable(s) 95 mm²
Power circuit: connector 1 cable(s) 95 mm²
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: bolted connection
tightening torque Power circuit: 10 N.m
Control circuit: 1.2 N.m
control circuit voltage limits Operational: 0.85…1.1 Uc 40…400 Hz (at 55 °C)
Drop-out: 0.35…0.55 Uc 40…400 Hz (at 55 °C)
inrush power in VA 770 VA 40…400 Hz cos phi 0.9 (at 20 °C)
hold-in power consumption in VA 8.1 VA 40…400 Hz cos phi 0.9 (at 20 °C)
heat dissipation 5.9…7.2 W
operating time 35 ms closing (at Uc)
130 ms opening (at Uc)
mechanical durability 10 Mcycles
maximum operating rate 2400 cyc/h 55 °C
compatibility code LC1F

Reviews

There are no reviews yet.

Be the first to review “TeSys F contactor – 4P (4 NO) – AC-1 – <= 440 V 200 A - coil 220 V AC”

Your email address will not be published. Required fields are marked *